visualstation – Page 2 – VisualStation's Notepad

September 3, 2015 by visualstation 0

LibreNMS with NGINX, rSyslog and …

How to configure rSyslog to send all remote logs into LibreNMS

First create the following config inside “/etc/rsyslog.d/”

April 9, 2015 by visualstation 0

Comment connecter un AndroidPhone avec un firewall Watchguard ?

La mise en place est triviale. Il faut le matériel suivant: * Un firewall Watchguard * Un smartphone Android * 2 connexions à internet Au niveau du firewall Watchguard, il faut avoir au préalable activé le service VPN SSL et aller récupérer la configuration ovpn fournie par le firewall à l’adresse suivante: https://<url_de_votre_firewall/sslvpn.html Une fois que vous avez récupéré la configuration, il va falloir scinder cette configuration en plusieurs fichiers: * Le certificat CA * Le certificat Utilisateur * Le clef Utilisateur Soit, importer directement le fichier téléchargé. Il est conseillé de renommer le fichier avec un nom intelligent pour que lors de l’importation de ce dernier par OpenVPN for Android, vous n’ayez pas 2 profils VPN similaires. Une fois que cette étape est passée allez sur l’Android Market et faites l’installation du client “OpenVPN for Android”. Vous pouvez maintenant lancer votre VPN et vous authentifiez sur votre réseau. Bon…

March 5, 2015 by visualstation 0

Cisco

Upgrade Cisco Prime Infrastructure 1.3 to 2.1

I followed this article: https://rscciew.wordpress.com/2014/08/23/prime-infrastructure-1-3-to-2-1-upgrade/ Pay attention: Don’t forget to stop NCS To install a patch use: “patch install” To upgrade use: “application upgrade” Put directly files in /localdisk/defaultRepo Add the repository defaultRepo pointing to “disk: /defaultRepo/” But before realizing this upgrade, I got several problems: Not enough space on the virtual machine Solved by adding a disk and playing with LVM tools. Not enough memory:

[ERROR] System does not meet minimum resource requirements:
- Physical memory available [8043452 KB] is less than the minimum required value of 12 GB

1 2	[ERROR] System does not meet minimum resource requirements: - Physical memory available [8043452 KB] is less than the minimum required value of 12 GB

No access to a FTP server, only SSH was available to upload files So, I activated the root account (I’m pretty sure, it’s just a “sudo”) via enable_root Added “PermitRootLogin Yes” in sshd_config Changed the password of the root account via “passwd” Restarted the sshd process via “/etc/init.d/sshd restart” Launched my session via SecureCRT and uploaded patches via the SFTP tab. Rollback my modifications in the sshd_config Take a cup of coffee and wait till the upgrade is finished.

October 13, 2014 by visualstation 0

Uncategorized

How to update a redhat 5.x when yum is not installed

Sometime, It’s hard to discover that someone failed to install properly a server with the right tools. Today, it was a Redhat Enterprise Server 5.4 “BareMetal” not updated since a while … So first, I uploaded the ISO from 5.11 on the server, Second, created a local directory Third, mounted the ISO on it At the end, I finished by creating the local.repo file to allow yum to find what it needs. But, “YUM” was not installed on the server ! Right, it’s time to install it with RPM. First, go to the local repository directory and then in the directory “Server”, and copy paste this line:

rpm -Uvh yum-3.2.22-40.el5.noarch.rpm python-elementtree-1.2.6-5.i386.rpm python-iniparse-0.2.3-6.el5.noarch.rpm python-sqlite-1.1.7-1.2.1.i386.rpm rpm-python-4.4.2.3-34.el5.i386.rpm yum-metadata-parser-1.1.2-4.el5.i386.rpm rpm-libs-4.4.2.3-34.el5.i386.rpm popt-1.10.2.3-34.el5.i386.rpm python-urlgrabber-3.1.0-6.el5.noarch.rpm m2crypto-0.16-9.el5.i386.rpm rpm-4.4.2.3-34.el5.i386.rpm

rpm -Uvh yum-3.2.22-40.el5.noarch.rpm python-elementtree-1.2.6-5.i386.rpm python-iniparse-0.2.3-6.el5.noarch.rpm python-sqlite-1.1.7-1.2.1.i386.rpm rpm-python-4.4.2.3-34.el5.i386.rpm yum-metadata-parser-1.1.2-4.el5.i386.rpm rpm-libs-4.4.2.3-34.el5.i386.rpm popt-1.10.2.3-34.el5.i386.rpm python-urlgrabber-3.1.0-6.el5.noarch.rpm m2crypto-0.16-9.el5.i386.rpm rpm-4.4.2.3-34.el5.i386.rpm

You should have something similar:

Preparing...                ########################################### [100%]
   1:popt                   ########################################### [  9%]
   2:m2crypto               ########################################### [ 18%]
   3:yum-metadata-parser    ########################################### [ 27%]
   4:python-sqlite          ########################################### [ 36%]
   5:python-elementtree     ########################################### [ 45%]
   6:python-urlgrabber      ########################################### [ 55%]
   7:python-iniparse        ########################################### [ 64%]
   8:rpm-libs               ########################################### [ 73%]
   9:rpm                    ########################################### [ 82%]
  10:rpm-python             ########################################### [ 91%]
  11:yum                    ########################################### [100%]

Preparing... ########################################### [100%]

1:popt ########################################### [ 9%]

2:m2crypto ########################################### [ 18%]

3:yum-metadata-parser ########################################### [ 27%]

4:python-sqlite ########################################### [ 36%]

5:python-elementtree ########################################### [ 45%]

6:python-urlgrabber ########################################### [ 55%]

7:python-iniparse ########################################### [ 64%]

8:rpm-libs ########################################### [ 73%]

9:rpm ########################################### [ 82%]

10:rpm-python ########################################### [ 91%]

11:yum ########################################### [100%]

And now, you can update the server via a simple yum update -y.

July 29, 2014 by visualstation 0

Bidouilles, Bordel

How to send a backup of a Barracuda NG Firewall via email

How to create a backup of the firewall:

cd /opt/phion/config/configroot/
phionar cdl /tmp/$(date "+%Y%m%d")-$(hostname)-backup.par *

1 2	cd /opt/phion/config/configroot/ phionar cdl /tmp/$(date "+%Y%m%d")-$(hostname)-backup.par *

How to build an email with attachment with bash and openssl:

#!/usr/bin/env bash
#
# Author:       Brice Lilot

FILE=/tmp/mail.txt

DATE=$(date "+%a, %d %b %Y %H:%M:%S %z")
SUBJECT="Firewall Backup"
CUSTOMER="Customer"
FROM="firewall@customer.tld"

echo "HELO MAIL.CUSTOMER.TLD" &gt; $FILE
echo "MAIL FROM:&lt;$FROM&gt;" &gt;&gt; $FILE
echo "RCPT TO:&lt;$1&gt;" &gt;&gt; $FILE
echo "DATA" &gt;&gt; $FILE
echo "From: Firewall $CUSTOMER &lt;$FROM&gt;" &gt;&gt; $FILE
echo "To: &lt;$1&gt;" &gt;&gt; $FILE
echo "Date: $DATE" &gt;&gt; $FILE
echo "Subject: [$CUSTOMER] Firewall Backup - Done" &gt;&gt; $FILE
echo "MIME-Version: 1.0" &gt;&gt; $FILE
echo "Content-Type:multipart/mixed;boundary="boundary-yradnuob"" &gt;&gt; $FILE
echo "--boundary-yradnuob" &gt;&gt; $FILE
echo "Content-Type: text/plain; charset=us-ascii" &gt;&gt; $FILE
cat &lt;&lt;&lt;&gt;&gt;&gt;$FILE

Backup successful
Date: $DATE
Filename: $2

EOF
echo "--boundary-yradnuob" &gt;&gt; $FILE 
echo "Content-Type: application/octet-stream;name="$2"" &gt;&gt; $FILE
echo "Content-Transfer-Encoding:base64" &gt;&gt; $FILE
echo "Content-Disposition:attachment;filename="$2"" &gt;&gt; $FILE
openssl base64 &gt; $FILE
echo "" &gt;&gt; $FILE
echo "" &gt;&gt; $FILE
echo "." &gt;&gt; $FILE
echo "QUIT" &gt;&gt; $FILE
echo "" &gt;&gt; $FILE

#!/usr/bin/env bash

# Author: Brice Lilot

FILE=/tmp/mail.txt

DATE=$(date "+%a, %d %b %Y %H:%M:%S %z")

SUBJECT="Firewall Backup"

CUSTOMER="Customer"

FROM="[email protected]"

echo "HELO MAIL.CUSTOMER.TLD" > $FILE

echo "MAIL FROM:<$FROM>" >> $FILE

echo "RCPT TO:<$1>" >> $FILE

echo "DATA" >> $FILE

echo "From: Firewall $CUSTOMER <$FROM>" >> $FILE

echo "To: <$1>" >> $FILE

echo "Date: $DATE" >> $FILE

echo "Subject: [$CUSTOMER] Firewall Backup - Done" >> $FILE

echo "MIME-Version: 1.0" >> $FILE

echo "Content-Type:multipart/mixed;boundary="boundary-yradnuob"" >> $FILE

echo "--boundary-yradnuob" >> $FILE

echo "Content-Type: text/plain; charset=us-ascii" >> $FILE

cat <<<>>>$FILE

Backup successful

Date: $DATE

Filename: $2

EOF

echo "--boundary-yradnuob" >> $FILE

echo "Content-Type: application/octet-stream;name="$2"" >> $FILE

echo "Content-Transfer-Encoding:base64" >> $FILE

echo "Content-Disposition:attachment;filename="$2"" >> $FILE

openssl base64 > $FILE

echo "" >> $FILE

echo "." >> $FILE

echo "QUIT" >> $FILE

echo "" >> $FILE

How to send an email via Netcat:

nc $SERVER $PORT &lt; /tmp/mail.txt

1	nc $SERVER $PORT < /tmp/mail.txt

July 4, 2014 by visualstation 0

Uncategorized

Enabling dayligth saving time on Huawei Switches

How to enable daylight saving time on Huawei Switches: CEST:

clock daylight-saving-time CEST repeating 01:00 last Sun Mar 01:00 last Sun Oct 01:00

1	clock daylight-saving-time CEST repeating 01:00 last Sun Mar 01:00 last Sun Oct 01:00

July 3, 2014 by visualstation 0

Uncategorized

Rebuild indexes from SolarWinds Orion Server

SolarWinds sell a great solution for monitoring your network and your servers, but regarding the maintenance of the server itself or its database, there is a leak. After serveral months of intensive utilization, indexes from all tables become fragmented and the responsiveness from the SolarWinds Orion decrease a lot. At the beginning, in less than 10 seconds everything was finished but now, you can have a break and take a coffee and be back to see slowly the result. I decided to build a script (Basic MS SQL) to select the most fragmented table (and the most heavy) and to build the “Rebuild script”.

SET NOCOUNT ON

DECLARE @myTables TABLE(
tab varchar(256) NOT NULL,
ind varchar(256) NOT NULL
);

Declare @tabt varchar(256);
Declare @indt varchar(256);

INSERT INTO @myTables
SELECT dbtables.[name] as 'Table', dbindexes.[name] as 'Index'
FROM sys.dm_db_index_physical_stats (DB_ID(), NULL, NULL, NULL, NULL) AS indexstats
INNER JOIN sys.tables dbtables on dbtables.[object_id] = indexstats.[object_id]
INNER JOIN sys.schemas dbschemas on dbtables.[schema_id] = dbschemas.[schema_id]
INNER JOIN sys.indexes AS dbindexes ON dbindexes.[object_id] = indexstats.[object_id]
AND indexstats.index_id = dbindexes.index_id
WHERE indexstats.database_id = DB_ID() and (indexstats.page_count * indexstats.avg_fragmentation_in_percent) &gt; 10000
--ORDER BY indexstats.avg_fragmentation_in_percent desc
ORDER BY indexstats.page_count * (indexstats.avg_fragmentation_in_percent) desc;

WHILE (SELECT COUNT(*) FROM @myTables) &gt; 0
BEGIN
SELECT TOP 1 @indt = ind, @tabt = tab
FROM @myTables;

DELETE @myTables WHERE ind = @indt AND tab = @tabt;

PRINT 'USE [SolarWindsOrion]'
PRINT 'GO'
PRINT 'ALTER INDEX '+@indt+' ON [dbo].['+@tabt+'] REBUILD PARTITION = ALL WITH ( PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, ONLINE = OFF, SORT_IN_TEMPDB = OFF )';
PRINT 'GO'
PRINT 'PRINT ''The index '+@indt+' from '+@tabt+' has been defragmented''';
END;

SET NOCOUNT ON

DECLARE @myTables TABLE(

tab varchar(256) NOT NULL,

ind varchar(256) NOT NULL

);

Declare @tabt varchar(256);

Declare @indt varchar(256);

INSERT INTO @myTables

SELECT dbtables.[name] as 'Table', dbindexes.[name] as 'Index'

FROM sys.dm_db_index_physical_stats (DB_ID(), NULL, NULL, NULL, NULL) AS indexstats

INNER JOIN sys.tables dbtables on dbtables.[object_id] = indexstats.[object_id]

INNER JOIN sys.schemas dbschemas on dbtables.[schema_id] = dbschemas.[schema_id]

INNER JOIN sys.indexes AS dbindexes ON dbindexes.[object_id] = indexstats.[object_id]

AND indexstats.index_id = dbindexes.index_id

WHERE indexstats.database_id = DB_ID() and (indexstats.page_count * indexstats.avg_fragmentation_in_percent) > 10000

--ORDER BY indexstats.avg_fragmentation_in_percent desc

ORDER BY indexstats.page_count * (indexstats.avg_fragmentation_in_percent) desc;

WHILE (SELECT COUNT(*) FROM @myTables) > 0

BEGIN

SELECT TOP 1 @indt = ind, @tabt = tab

FROM @myTables;

DELETE @myTables WHERE ind = @indt AND tab = @tabt;

PRINT 'USE [SolarWindsOrion]'

PRINT 'GO'

PRINT 'ALTER INDEX '+@indt+' ON [dbo].['+@tabt+'] REBUILD PARTITION = ALL WITH ( PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, ONLINE = OFF, SORT_IN_TEMPDB = OFF )';

PRINT 'GO'

PRINT 'PRINT ''The index '+@indt+' from '+@tabt+' has been defragmented''';

END;

It’s not perfect (it’s crappy, I know) but it solved my problem.

May 9, 2013 by visualstation 0

Cisco, My Life, Uncategorized

Configuration d’un téléphone 7962G en SIP

Pour mon usage personnel, J’ai réparé un téléphone Cisco 7962G, pour ensuite le mettre sur mon PBX personnel. Pour se faire, il y a quelques étapes à respecter: Utiliser le firmware SIP42.9-1-1SR1S (Les firmwares supérieurs ne fonctionnent pas avec le fichier de configuration). Ajouter la ligne suivante dans XMLDefault.cnf.xml: <loadInformation404 model=”Cisco 7962″>SIP42.9-1-1SR1S</loadInformation404>. Utiliser le fichier de configuration que je vais fournir ici en modifiant les valeurs en fonction de votre environement.

<device>
<deviceProtocol>SIP</deviceProtocol> 
<sshUserId>__USERNAME__</sshUserId>  
<sshPassword>__PASSWORD__</sshPassword> 
<devicePool>  
 <dateTimeSetting>  
    <dateTemplate>D/M/Y</dateTemplate>  
    <timeZone>UTC Standard/Daylight Time</timeZone>
    <ntps>  
         <ntp>  
             <name>europe.pool.ntp.org</name>  
             <ntpMode>Unicast</ntpMode>  
         </ntp>  
    </ntps>  
 </dateTimeSetting>  
 <callManagerGroup>  
    <members>  
       <member priority="0">  
          <callManager>  
             <ports>  
                <ethernetPhonePort>2000</ethernetPhonePort>  
                <sipPort>5060</sipPort>  
                <securedSipPort>5061</securedSipPort>  
             </ports>  
             <processNodeName>__IP_ADDRESS_PBX__</processNodeName>  
          </callManager>  
       </member>  
    </members>  
 </callManagerGroup>  
</devicePool>  
<sipProfile> 
 <sipProxies>  
    <backupProxy>USECALLMANAGER</backupProxy>  
    <backupProxyPort>5060</backupProxyPort>  
    <emergencyProxy>USECALLMANAGER</emergencyProxy>  
    <emergencyProxyPort>5060</emergencyProxyPort>  
    <outboundProxy></outboundProxy>  
    <outboundProxyPort></outboundProxyPort>  
    <registerWithProxy>true</registerWithProxy>  
 </sipProxies>  
 <sipCallFeatures> 
    <cnfJoinEnabled>true</cnfJoinEnabled>  
    <callForwardURI>x--serviceuri-cfwdall</callForwardURI>  
    <callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>  
    <callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>  
    <callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>  
    <meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>  
    <abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>  
    <rfc2543Hold>false</rfc2543Hold>  
    <callHoldRingback>2</callHoldRingback>  
    <localCfwdEnable>true</localCfwdEnable>  
    <semiAttendedTransfer>true</semiAttendedTransfer>  
    <anonymousCallBlock>2</anonymousCallBlock>  
    <callerIdBlocking>2</callerIdBlocking>  
    <dndControl>0</dndControl>  
    <remoteCcEnable>true</remoteCcEnable>  
 </sipCallFeatures> 
 <sipStack>  
    <sipInviteRetx>6</sipInviteRetx>  
    <sipRetx>10</sipRetx>  
    <timerInviteExpires>180</timerInviteExpires>  
    <timerRegisterExpires>1200</timerRegisterExpires>  
    <timerRegisterDelta>5</timerRegisterDelta>  
    <timerKeepAliveExpires>120</timerKeepAliveExpires>  
    <timerSubscribeExpires>120</timerSubscribeExpires>  
    <timerSubscribeDelta>5</timerSubscribeDelta>  
    <timerT1>500</timerT1>  
    <timerT2>4000</timerT2>  
    <maxRedirects>70</maxRedirects>  
    <remotePartyID>false</remotePartyID>  
    <userInfo>None</userInfo>  
 </sipStack> 
 <autoAnswerTimer>1</autoAnswerTimer>  
 <autoAnswerAltBehavior>false</autoAnswerAltBehavior>  
 <autoAnswerOverride>true</autoAnswerOverride>  
 <transferOnhookEnabled>false</transferOnhookEnabled>  
 <enableVad>false</enableVad> 
 <preferredCodec>none</preferredCodec>  
 <dtmfAvtPayload>101</dtmfAvtPayload>  
 <dtmfDbLevel>3</dtmfDbLevel>  
 <dtmfOutofBand>avt</dtmfOutofBand>  
 <alwaysUsePrimeLine>false</alwaysUsePrimeLine>  
 <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>  
 <kpml>3</kpml>
 <natReceivedProcessing>true</natReceivedProcessing>  
 <natEnabled>false</natEnabled>  
 <natAddress></natAddress>  
 <phoneLabel></phoneLabel> 
 <stutterMsgWaiting>1</stutterMsgWaiting> 
 <callStats>false</callStats>  
 <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>  
 <disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig> 
 <startMediaPort>16384</startMediaPort>  
 <stopMediaPort>32766</stopMediaPort> 
 <sipLines> 
  <line  
     button="1"> 
       <featureID>9</featureID>  
       <featureLabel>__LINE_LABEL__</featureLabel>  
       <proxy>USECALLMANAGER</proxy>  
       <port>5060</port> 
       <name>__NAME__</name> 
       <displayName>__DISPLAYNAME__</displayName>  
       <autoAnswer>
          <autoAnswerEnabled>2</autoAnswerEnabled>
       </autoAnswer>  
       <callWaiting>3</callWaiting> 
       <authName>__SIP_USERNAME__</authName>  
       <authPassword>__SIP_PASSWORD__</authPassword>  
       <sharedLine>false</sharedLine> 
       <messageWaitingLampPolicy>1</messageWaitingLampPolicy>  
       <messagesNumber>__VOICEMAIL__</messagesNumber>  
       <ringSettingIdle>4</ringSettingIdle>  
       <ringSettingActive>5</ringSettingActive> 
       <contact>__CONTACTNAME__</contact>  
       <forwardCallInfoDisplay>  
          <callerName>true</callerName>  
          <callerNumber>false</callerNumber>  
          <redirectedNumber>false</redirectedNumber>  
          <dialedNumber>true</dialedNumber>  
       </forwardCallInfoDisplay>  
    </line>
</sipLines>
 <voipControlPort>5060</voipControlPort>  
 <dscpForAudio>184</dscpForAudio>  
 <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>  
 <dialTemplate>dialplan.xml</dialTemplate>  
</sipProfile> 
<commonProfile>  
 <phonePassword></phonePassword>
 <backgroundImageAccess>true</backgroundImageAccess>  
 <callLogBlfEnabled>2</callLogBlfEnabled>  
</commonProfile> 
<loadInformation>SIP42.9-1-1SR1S</loadInformation> 
<vendorConfig> 
 <disableSpeaker>false</disableSpeaker> 
 <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset> 
 <pcPort>0</pcPort> 
 <settingsAccess>1</settingsAccess>
 <garp>0</garp> 
 <voiceVlanAccess>0</voiceVlanAccess>
 <videoCapability>0</videoCapability>  
 <autoSelectLineEnable>1</autoSelectLineEnable> 
 <sshAccess>1</sshAccess>
 <sshPort>22</sshPort>
 <webAccess>1</webAccess>  
 <spanToPCPort>0</spanToPCPort>  
 <loggingDisplay>1</loggingDisplay>  
 <loadServer></loadServer>  
</vendorConfig> 
<versionStamp>1143565489-a3cbf294-7526-4c29-8791-c4fce4ce4c38</versionStamp> 
<userLocale> 
 <name>Belgium</name> 
<uid>1</uid> 
 <langCode>en_US</langCode> 
<version>1.0.0.0-1</version> 
 <winCharSet>iso-8859-1</winCharSet> 
</userLocale> 
<deviceSecurityMode>1</deviceSecurityMode> 
<authenticationURL></authenticationURL>  
<directoryURL></directoryURL>  
<idleURL></idleURL>  
<informationURL></informationURL> 
<messagesURL></messagesURL>  
<proxyServerURL></proxyServerURL>  
<servicesURL></servicesURL> 
<dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>  
<dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>  
<dscpForCm2Dvce>96</dscpForCm2Dvce>
<transportLayerProtocol>2</transportLayerProtocol>

<capfAuthMode>0</capfAuthMode>  
<capfList>  
 <capf>  
    <phonePort>3804</phonePort>  
 </capf>  
</capfList> 
<certHash></certHash>  
<encrConfig>false</encrConfig>  
</device>

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

<sshUserId>__USERNAME__</sshUserId>

<sshPassword>__PASSWORD__</sshPassword>

<timeZone>UTC Standard/Daylight Time</timeZone>

<ntps>

<ntp>

<name>europe.pool.ntp.org</name>

<ntpMode>Unicast</ntpMode>

</ntp>

</ntps>

</dateTimeSetting>

<ports>

</ports>

<processNodeName>__IP_ADDRESS_PBX__</processNodeName>

</callManager>

</member>

</members>

</callManagerGroup>

</devicePool>

<backupProxy>USECALLMANAGER</backupProxy>

<emergencyProxy>USECALLMANAGER</emergencyProxy>

</sipProxies>

<callForwardURI>x--serviceuri-cfwdall</callForwardURI>

<callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>

<callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>

<callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>

<meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>

<abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>

<rfc2543Hold>false</rfc2543Hold>

</sipCallFeatures>

<remotePartyID>false</remotePartyID>

</sipStack>

<autoAnswerAltBehavior>false</autoAnswerAltBehavior>

<transferOnhookEnabled>false</transferOnhookEnabled>

<enableVad>false</enableVad>

<alwaysUsePrimeLine>false</alwaysUsePrimeLine>

<alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>

<natEnabled>false</natEnabled>

<callStats>false</callStats>

<disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig>

<line

button="1">

<featureLabel>__LINE_LABEL__</featureLabel>

<proxy>USECALLMANAGER</proxy>

<displayName>__DISPLAYNAME__</displayName>

</autoAnswer>

<authName>__SIP_USERNAME__</authName>

<authPassword>__SIP_PASSWORD__</authPassword>

<sharedLine>false</sharedLine>

<messagesNumber>__VOICEMAIL__</messagesNumber>

<contact>__CONTACTNAME__</contact>

<callerNumber>false</callerNumber>

<redirectedNumber>false</redirectedNumber>

</forwardCallInfoDisplay>

</line>

</sipLines>

<dialTemplate>dialplan.xml</dialTemplate>

</sipProfile>

</commonProfile>

<disableSpeaker>false</disableSpeaker>

<disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>

</vendorConfig>

<name>Belgium</name>

</userLocale>

<capf>

</capf>

</capfList>

<encrConfig>false</encrConfig>

</device>

Liens utiles: http://adis.ca/post/using-cisco-ip-phones-with-asterisk/ http://www.voip-info.org/wiki/view/Asterisk+Presence+for+Cisco+79×1+Phones http://forums.asterisk.org/viewtopic.php?p=166124 http://www.dslreports.com/forum/r26632503-Voip.ms-Cisco-7942-configuration-files https://supportforums.cisco.com/docs/DOC-15799 http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79xx https://sites.google.com/site/seppsbrainoverload/cisco-corner/cisco-voice/cp-7941g-sip-setup http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a0080094584.shtml#issue5

7962g Cisco configuration voice voip

November 19, 2012 by visualstation 2

Uncategorized

Son IPBX personnel avec Nomado et FreeSWITCH

A l’heure d’aujourd’hui, pouvoir diminuer les couts et avoir une infrastructure téléphonique qui ne dépend pas de son opérateur historique (dans mon cas, la société Belgacom), il existe dans le monde de l’open source deux excellents logiciels: Asterisk FreeSWITCH Les deux logiciels offrent pas mal de fonctionnalités. J’ai travaillé par le passé avec Asterisk et maintenant je tourne uniquement avec FreeSWITCH (c’est qune question de gout). Cependant, sans un fournisseur de service pour pouvoir passer des appels téléphoniques externes, votre IPBX, il ne sert pas à grand chose. A la suite d’une discussion avec un collègue, j’ai essayé il y a maintenant un an, le founisseur de service “Nomado Telecom”, et je dois dire que je n’ai aps été déçu. La qualité du service est excellente, le support semble réactif (pour le peu que je le solicite) et le coût global de la solution FreeSWITCH + Nomado “PACK BE” +…

May 9, 2012 by visualstation 0

Linux

How to add the page number on a PDF file

A friend had a small problem to add a page number on a PDF with a lot of pages. After a quick chat, I have built this script:

#!/bin/bash
# Author: Brice Lilot
# Contact: brice_lilot [at] visualstation [dot] be
# Website: http://www.visualstation.be/
# Revision: 0.1
# Last modification:
#   * 2012-05-09:
#    - First shot !
#

if [ -d $1 ]
then
	printf "The directory already existn"
	cd $1
	rm -rf *.jpg	
else
	mkdir $1
	cd $1
fi

whereismyfont=`find /usr/share/fonts -iname "DejaVuSans.ttf"`

gs -dBATCH -dNOPAUSE -dSAFER -sDEVICE=jpeg -dJPEGQ=95 -r600x600 -sOutputFile=./$1-page-%d.jpg ../$1.pdf &gt;&gt; /dev/null

cFiles=`find . -iname "*.jpg" | wc -l`
for (( i=1; i &lt;= $cFiles; i++))
do
	mogrify -quality 100% -font $whereismyfont 
		-pointsize 90 -draw "gravity southeast fill #000000 text 600,300 '$i/$cFiles'" 
		$1-page-$i.jpg
		printf "Page $i converted and numberedn"
done

param=""
for (( i=1; i &lt;= $cFiles; i++))
do
   dimension=$(identify -format "%[fx:(w)] %[fx:(h)]" "$1-page-${i}.jpg")
   param="${param} &gt;&gt;/PageSize [${dimension}]&lt;&lt; setpagedevice ($1-page-${i}.jpg) viewJPEG showpage"
done

gs 
  -sDEVICE=pdfwrite 
  -dPDFSETTINGS=/prepress 
  -o "$1_final.pdf" 
   viewjpeg.ps 
  -c "${param}"

#!/bin/bash

# Author: Brice Lilot

# Contact: brice_lilot [at] visualstation [dot] be

# Website: http://www.visualstation.be/

# Revision: 0.1

# Last modification:

# * 2012-05-09:

# - First shot !

if [ -d $1 ]

then

printf "The directory already existn"

cd $1

rm -rf *.jpg

else

mkdir $1

cd $1

whereismyfont=`find /usr/share/fonts -iname "DejaVuSans.ttf"`

gs -dBATCH -dNOPAUSE -dSAFER -sDEVICE=jpeg -dJPEGQ=95 -r600x600 -sOutputFile=./$1-page-%d.jpg ../$1.pdf >> /dev/null

cFiles=`find . -iname "*.jpg" | wc -l`

for (( i=1; i <= $cFiles; i++))

mogrify -quality 100% -font $whereismyfont

-pointsize 90 -draw "gravity southeast fill #000000 text 600,300 '$i/$cFiles'"

$1-page-$i.jpg

printf "Page $i converted and numberedn"

done

param=""

for (( i=1; i <= $cFiles; i++))

dimension=$(identify -format "%[fx:(w)] %[fx:(h)]" "$1-page-${i}.jpg")

param="${param} >>/PageSize [${dimension}]<< setpagedevice ($1-page-${i}.jpg) viewJPEG showpage"

done

-sDEVICE=pdfwrite

-dPDFSETTINGS=/prepress

-o "$1_final.pdf"

viewjpeg.ps

-c "${param}"

Have fun !

20/88